Pre sale
Our company has experienced professional pre-sale service staff 7 * 24 hours online waiting for your inquiry.
Multiple communication channels, Email, Telephone, whatsapp, wechat,facebook etc there is always one for you.
From R & D to production, to sales and shipments to the after-sales maintenance one-stop service,customize products according to the actual use of environment.
In Sale
Weekly production status update available
Provide pre-shipment inspection report，material test certificates etc
The transportation method is provided according to the actual needs of customers. Our company is within 30 minutes’ drive from Yangshan Deepwater Port and Pudong International Airport
Follow up the progress of the freight and provide the necessary customs clearance documents in time
After Sale
The installation and maintenance instructions are sent with the goods. If necessary, our company can provide remote online guidance installation service.
The warranty period is 12 months. We will be responsible for solving problems caused by the quality of the product itself during the warranty period. Methods include, but not limited as technical guidance, replacement of parts, replacement and other measures.
For non-quality reasons during the warranty period parts or accessories that need to be replaced or outside the warranty period, there may be a certain charges depend on the actual situation.
Customers need to operate according to the installation instructions and maintenance manuals provided by our company.
“Guides
to help you“
We provide guides to help you properly install, use and maintain your safety shower and emergency eyewash equipment.
How to install emergency eyewash
- Orient the fixed base and connect it to the ground with an expansion bolt.
- Attach and lock the 5/4 drainage tees to the base.
- Connect and lock the 5/4 steel pipe with the eyewash assembly and the 5/4 drainage triples.
- Attach and lock the eye washing basin on the eyewash assembly with an eye washing basin pressure cap.
- Connect and lock the filter to the eyewash spray nozzle.
- Attach and lock the assembled eyewash spray nozzle to the horn elbow by diagram.
- Put the assembled horn bends in the eyewash basin and attach and lock it to the basin pressure cap.
- Put the dust cover above the filter.
- Connect the 4-point bend to the eye wash assembly at an angle of 90 °.
- Connect and lock the 4-point inlet control valve to the 4-point bending pipe.
- Attach the push board to the 4-point water control valve and lock it.
Eyewash installation precautions
- It must be installed around the dangerous working area, generally at a distance of 10 or 15 meters.
- The location should be cleaned and confirmed and free of barrier.
- The water source of the eyewash should be drinking water.
- The eyewash should be cleaned and examined once in a week.
- Workers must be guided on the proper use of eyewash before using.
- Flushing of eyes and face should last at least 10 or 15 minutes.
How to use emergency eyewash
Remove the dust cover, push the activation valve on the eyewash station and water immediately flow out. Reset the valve and dust cover after use.
Notes
This product is used to temporarily mitigate the damage of hazardous material to users’ body in emergency. Further medical treatment requires medical guidance.
The product should be regularly inspected and troubleshot. The results should be recorded.
