Introduction:
The main machine is four columns, two screws, and the cylinder is under the type, the tensile space is located above the main machine, and the compression and bending test space is located between the lower beam of the main machine and the working table. The force measuring instrument adopts high-definition liquid crystal display, the experimental data is convenient and intuitive.
Introduction:
The main machine is four columns, two screws, and the cylinder is under the type, the tensile space is located above the main machine, and the compression and bending test space is located between the lower beam of the main machine and the working table. The force measuring instrument adopts high-definition liquid crystal display, the experimental data is convenient and intuitive.
Transmission system
The lower beam is lifted by motor through reducer, chain drive mechanism and screw vice drive to realize the adjustment of stretching and compressing space.
Third, the hydraulic system
The hydraulic oil in the oil tank enters the oil circuit through the high pressure pump driven by the motor, flows through the high pressure oil filter, sends back the oil valve and enters the oil cylinder. The force measuring instrument collects and analyzes the data through the sensor, and displays the hourly force value. The tester controls the flow rate through the oil feeding valve to realize the fast and slow test force rate.
Force Measurement System:
Support for tensile, compression, shear, bending and other tests;
Manually adjusts the oil feeding and returning valve, with simple and flexible operation;
Support test parameter customization;
Electronic force measurement, LCD display test force time curve, test force, test force peak, yield force of materials with obvious yield characteristics;
Flexible and convenient to query test results;
Equipped with a micro printer.
Safety Protection Device
When the test force exceeds 3% of the maximum test force, the overload protection, the oil pump motor shutdown.
When the piston rises to the upper limit position, limit protection, the oil pump motor stops.
When the beam descends to the set position, the limit protection and the reducer will stop.
Main Performance and Technical Indexes
|
Maximum Test Force (KN) |
1000 |
|
|
Test Force Measurement Range |
4%-100% |
No staging for the whole journey, equivalent to 3 staging |
|
Relative Error of Test Force Indication Value |
＜±1% of the displayed value |
|
|
Maximum Tensile Test Space (mm) |
600 |
|
|
Compression Space (mm) |
500 |
|
|
Piston Stroke (mm) |
200 |
|
|
Distance Between Columns (mm) |
585 |
|
|
Maximum Clamping Range of Round Specimen (mm) |
Φ13-Φ40 |
|
|
Maximum Clamping Thickness of Flat Specimen (mm) |
0-30 |
|
|
Max. Clamping Width of Flat Specimen (mm) |
75 |
|
|
Size of Platen (mm) |
φ160mm |
|
|
Clamping Mode |
Hydraulic automatic clamping |
|
|
Dimension of Main Machine (mm) |
900*710*2250 |
|
|
Size of Oil Source Console (mm) |
600×500×1250 |
|
|
Total Motor Power (kW) |
2 |
|
|
Total Weight (kg) |
2750 |
© Dongguan Zhongli Instrument Technology Co., Ltd.
Leave your inquiry, we will provide you with quality products and services!
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.
